| -2/1/02----Got a Haltech E6 EFI/DIS system and I also have purchased the full BAE (for which I already have an extra manifold). (neither are installed yet) |
Turbo
Manifold:
Manifold:
| Pictures: |
| -05/01/01----Installed aftermarket automaticly retracting antena (no special brand, just a $35 one from the local auto parts store) |
| Here are pictures on the progress of my 924 project car. This project started Dec. 2000, and this is the pictorial documentary on (most of) the modifications I have done so far: |
| Info without Pictures: |
| -06/01/01-10/31/01----Removed and replaced the clutch/pressure plate/throw-out/pilot bearing |
| Updated on June 10, 2002 |
| Counter reset on May 3, 2002 |
Valve Spring Compressor: Anybody that has
to do head work on a 924 knows how hard it
is to find a spring compressor that will work
with the 924 head. I bought a large "C"
clamp type compressor that wraps completely
around the head, then I had to fabricate my
own head that would press deep enough to
get to the retainers. See the pictures by
clicking here.
to do head work on a 924 knows how hard it
is to find a spring compressor that will work
with the 924 head. I bought a large "C"
clamp type compressor that wraps completely
around the head, then I had to fabricate my
own head that would press deep enough to
get to the retainers. See the pictures by
clicking here.
